Minelab GPX 4800

Minelab GPX 4800 metal detector
  • Model Features

    • Manufacturer: Minelab (Australia)
    • Model: GPX 4800
    • Year: 2010 - 2016
    • Type: ground detector
    • Rating (owner reviews): ★★★★★
    • Display: Yes
    • Technology: MPS
    • Frequency: 3 / 7.5 / 18.75 kHz
    • VDI / Numerical Target-ID: No
    • Manual ground balance: Yes
    • Automatic ground balance: Yes
    • Noise cancel: Yes
    • Sound, tones: Multiton
    • Adjusting the volume: Yes
    • Pinpoint: Yes
    • Using headphones: Yes
    • Search coil: Minelab Commander 11 DD
  • Parameters

    • Batteries: Accumulator, Li-ion
    • Weight: 2,4 kg
    • Length (min/max): 110-130 cm

Coils for Minelab GPX 4800

Review

minelab-gpx-4800-01

The Minelab GPX 4800 is a professional ground metal detector designed for search of gold nuggets as well as antiquities and hoards. The device works equally well both on land and in water, at that it is not allowed to submerse the control box in water (the coil is waterproof only, however, the control box of the detector isn’t).

minelab-gpx-4800-05

The GPX 4800 is developed on MPS technology. The device operates at frequencies of 3 and 15 kHz. The cutting-edge technologies designed by Minelab are applied in the detector: Multi Period Sensing (MPS), Dual Voltage Technology (DVT) and Smart Electronic Timing Alignment (SETA). The metal discrimination on the visual scale is divided into 10 segments. There is a depth indicator. Also, the GPX 4800 has an adjustable sensitivity, ground balance, threshold, tune (to minimize electrical interference) and motion control (coil sweep speed). The sensitivity is adjusted in the range of 1-15.The Minelab GPX 4800 metal detector has an automatic and manual ground balance. The threshold is tuned manually. A multi-tone audio response is applied for indicating a find and has an adjustable volume which is tuned in the range of 1-20. There is a 6.35mm headphone socket located on the battery pack.

minelab-gpx-4800-04

The Minelab GPX 4800 detector comes with a Minelab Commander 11 DD coil as standard equipment. For this device there exist a great number of coils of different sizes and parameters. The power supply of the unit is a 7.4V-9.2Аh Lithium-ion battery pack. The size of the detector is 110-130cm (adjustable height). The weight of the Minelab GPX 4800 (assembled) is 2.4kg.

minelab-gpx-4800-02

minelab-gpx-4800-03

Leave a Reply

Your email address will not be published. Required fields are marked *