Garrett AT Gold repair. How to open the control box

What should you do if your Garrett AT Gold emits a constant beeping sound? If you have already tried 3 different coils, but it doesn’t help. The problem isn’t unique, and there is a solution: you should dismantle your detector first. Here’s a useful video: how to open the Garrett AT Gold control box (and the Garrett AT PRO housing, too).

All content related to the Garrett AT Gold is collected here (news, tests, comparisons with other detectors, different reviews and opinions). Plus, on Knowledgebase pages there is additional information you should know before buying this machine. Happy hunting to all!

11 Responses to Garrett AT Gold repair. How to open the control box

  • Garrett at gold is very sensitive to what batteries you use or what cover it does not support the metal around the box control ,yes there may be a manufacturing defect plug or wire connectors.

  • Hi MDHUNTER,
    I have a Garrett AT Gold with two search coils a 5×8″ DD and a 4.5″ Sniper.
    When I try to use the 5×8″ the detector goes haywire and cannot pick up any signal,
    but when I use the 4.5″ Sniper it operates normally.Do you know how I can can test the
    5×8″ coil with a multimeter to see if it is faulty e.g resistance,impedence numbers.
    Thanks.

  • Garrett AT Gold kullanıyorum….arazıde gezerken bır anda ekran gitti…cihaz açılmıyor..sebebi ne olabilir?cihazımdan cok memnunum…pil yuvasını ve başka pil takarak denedım ama hiç açılmıyor…Turkiye den yazıyorum…yardımcı olursanız sevinirim..açılmamasına sebep ne olabilir?

  • My AT Gold detector gives no signal at all. The batteries are 100%. The power button is on. I tried different coils but no sound at all even when passing it over my metal hand shovel. All connections are tight.
    I was using it and all was fine but then it just went silent.
    I rebooted it several times but nothing worked.

  • i need an electronic component from the picture for garrett at pro

  • My AT gold is making crazy noises especially when it locks on the target. It goes really crazy. And will not stop even if you switch modes and I really want to use this detector. I’ve got some time coming up that I can go and that’s very rare to have with four kids in a full-time job and a wife and I own my own business it keeps me busy but I’m so sad that this thing is not working right I need help it’s got to be something simple.

  • My AT gold is making crazy noises especially when it locks on the target. It goes really crazy. And will not stop even if you switch modes and I really want to use this detector. I’ve got some time coming up that I can go and that’s very rare to have with four kids in a full-time job and a wife and I own my own business it keeps me busy but I’m so sad that this thing is not working right I need help it’s got to be something simple.

Leave a Reply to Oros Marius Cancel reply

Your email address will not be published. Required fields are marked *